Intelligent Multi Doors [2] Access Control Panel

The ITDC 2 Door Controller is a small and medium sized, intelligent field programmable Standalone / Network access control panel from RF Logics.

It provides an extremely cost-effective and unparalleled powerful integrated access control and facility management solution with the StarWatch ITDC Pro S/W and its modulated Elevator Pro (an elevator control & monitor S/W module with ITDC-EL control panel), ID badge Pro (ID Badge graphic printing S/W with Eltron, Fargo etc.), and View Pro S/W (integrated with 4, 6, 8, 16, and 32 Ch Video Surveillance S/W modules).

The ITDC 2 Door controller is also configurable for either 2 readers or 4 readers with stackable EIO88 board. Built-in RJ45 LAN socket will allow an immediate TCP/IP communication with optional add-on LAN module (IIM7100A). ITDC 2 Door Controller has 2 reader inputs, 4 form C-relays and 3TTL as outputs, 7 isolated inputs, and 21 LEDs for system status notification as well as self diagnostic display. RS232C/RS422 (CNP200), TCP/IP (Optional stackable LAN Module IIM7100A is required), and Dial Modem communication support. Its dynamic memory control will be able to reallocate the standard 20,000 card holder memory and 20,000 event buffer capacities.

It supports 26 bit Wiegand or higher reader input formats, ABA Track II, and Mifare Smart Card reader inputs. ITDC 2 Door Nema Pack has an integrated tamper switch, 3 LEDs for system status indication on the front cover, one 2 door controller board, and a maintenance-free 3 Amp power supply in the heavy-duty steel enclosure.

• Intelligent Multi Doors [2] Access Control Panel
• Dynamic Control of Memory up to 50,000 Users / up to 29,500 Event Buffers : 1,000 ~ 20,000 / 30,000 / 40,000 / 50,000 Users 20,000 ~ 29,500 / 3,000 / 8,000 / 14,000 Event Buffers
• Standalone/Network Communication via RS232 / RS422 / RS485 (Max.255ch), TCP/IP (Internal TCP/IP Module required (optional))
• Expansion I/O Board available (EIO88: 8 Inputs / 8 Outputs)
• Independent 7 Inputs and 7 Outputs including 4ea of 2 Form-C Relay Outputs
• 4ea of Reader Port for Anti-passback Function: 26bit Wiegand and 4 / 8bit Burst for PIN
• ARM / DISARM Function for Alarm Panel
• 2 Levels Individual Door Opening Time Setting available
• Remain ID & Event Data and Setting Value in case of Electric Outage
• Optional LCD display and Keypad connectable to control for Standalone Operation, Manual Setting
• Duress Mode Function
• Alarm Event Monitoring using Tamper Switch (by Application Software)
• Communication Status via LED Indicator
• Options: LCD display, Keypad (for standalone, manual setting) Internal TCP/IP Module Expansion I/O Board
• Compatible Software: STARWATCH iTDC PRO I / II

Intelligent Multi Doors [4] Access Control Panel

ITDC 4 Door Controller is a small and medium sized, intelligent field programmable Standalone / Network access control panel from RF Logics.

It provides an extremely cost-effective and unparalleled powerful integrated access control and facility management solution with the StarWatch ITDC Pro S/W and its modulated Elevator Pro (an elevator control & monitor S/W module with ITDC-EL control panel), ID badge Pro (ID Badge graphic printing S/W with Eltron, Fargo etc.) and View Pro S/Ws (integrated with 4, 6, 8, 16, and 32 Ch Video Surveillance S/W modules).

Built-in RJ45 LAN socket will allow an immediate TCP/IP communication with optional add-on LAN module (IIM7100A). ITDC 4 Door Controller has 4 reader inputs, 12 form C-relays and 3 TTL outputs, 15 isolated inputs, and 21 LEDs for system status notification as well as self diagnostic display. RS232C/RS422 (CNP200), TCP/IP (Optional stackable LAN Module IIM7100A is required), and Dial Modem communication support. Its dynamic memory control will be able to reallocate the standard 20,000 card holder memory and 20,000 event buffer capacities.

It supports 26 bit Wiegand or higher reader input formats, ABA Track II, and Mifare Smart Card reader inputs. ITDC 4 Door Nema Pack has an integrated tamper switch, 3 LEDs for system status indication on the front cover, one 4 door controller board, one EIO88, and two maintenance-free 3 Amp power supplies in the heavy-duty steel enclosure.

• Intelligent Multi Doors [4] Access Control Panel (EIO88 required to control 3 and 4 Doors)
• Dynamic Control of Memory up to 50,000 Users / up to 29,500 Event Buffers : 1,000 ~ 20,000 / 30,000 / 40,000 / 50,000 Users 20,000 ~ 29,500 / 3,000 / 8,000 / 14,000 Event Buffers
• Standalone/Network Communication via RS232 / RS422 / RS485 (Max.255ch), TCP/IP (Internal TCP/IP Module required (optional))
• Expansion I/O Board available (EIO88: 8 Inputs / 8 Outputs)
• Independent 7 Inputs and 7 Outputs including 4ea of 2 Form-C Relay Outputs
• 4ea of Reader Port for Anti-passback Function: 26bit Wiegand and 4 / 8bit Burst for PIN
• ARM / DISARM Function for Alarm Panel
• 2 Levels Individual Door Opening Time Setting available
• Remain ID & Event Data and Setting Value in case of Electric Outage
• Optional LCD display and Keypad connectable to control for Standalone Operation, Manual Setting
• Duress Mode Function
• Alarm Event Monitoring using Tamper Switch (by Application Software)
• Communication Status via LED Indicator
• Options: LCD display, Keypad (for standalone, manual setting) Internal TCP/IP Module Expansion I/O Board
• Compatible Software: STARWATCH iTDC PRO I / II

Intelligent Elevator Access Control Panel

ITDC Elevator Control Panel is a small and medium sized, intelligent field programmable Standalone / Network elevator control panel from RF Logics.

The StarWatch ITDC Pro S/W and its modulated Elevator Pro S/W (an elevator control & monitor S/W module with ITDC-EL control panel) provides an extremely cost-effective and unparalleled powerful integrated access control and building elevator management solution.

The Elevator Pro S/W can control elevators up to 64 floors. One ITDC-EL Pack will control 12 floors and up to 32 control panels can be chained per loop via RS232C/RS422 (CNP200), TCP/IP (Optional stackable LAN Module IIM7100A is required) Built-in RJ45 LAN socket will allow an immediate TCP/IP communication with optional add-on LAN module (IIM7100A). It supports 26 bit Wiegand or higher reader input formats, ABA Track II, and Mifare Smart Card reader inputs.

ITDC Elevator Control Panel has 4 reader inputs, 12 form C-relays and 3TTL as outputs, 15 isolated inputs and 21 LEDs for system status notification as well as self diagnostic display. RS232C/RS422 (CNP200), TCP/IP (Optional stackable LAN Module IIM7100A is required), and Dial Modem communication support. Its dynamic memory control will be able to reallocate the standard 20,000 card holder memory and 20,000 event buffer capacities. It shall be compatible only with ITDC control panel series.

ITDC-EL Nema Pack has an integrated tamper switch, 3 LEDs for system status indication on the front cover, one set of 12 floor control board, and two maintenance-free 3 Amp power supplies in the heavy-duty steel enclosure.

• Control up to 384 Floors (12 Floors per Controller, Expandable up to 32 Controllers)
• EIO Board (EIO88) included
• Dynamic Control of Memory up to 50,000 Users / up to 20,000 Event Buffers
• Standalone Operation or Integration with IDTECK¡¯s Access Control System (iTDC Controller)
• Standalone / Network Communication via RS232 / RS422 / RS485 (Max.255ch), TCP/IP (Internal TCP/IP Module required (optional))
• 4ea of Reader Port: 26 / 34bit Wiegand, 4 / 8bit Burst for PIN
• Support up to 4ea ¡°Key panels¡± in the one Elevator
• Each user can be set accessible floor
• Manage Event Data by Host Computer
• Remain ID & Event Data and Setting Value in case of Electric Outage
• Optional LCD display and Keypad connectable to control for Standalone Operation, Manual Setting
• Options: LCD display, Keypad (for standalone, manual setting) Internal TCP/IP Module
• Compatible Software: STARWATCH iTDC PRO I / II

Intelligent Single Door Access Control Panel

ICON100 Door Controller is a small and medium sized, intelligent field programmable Standalone / Network single door access control panel from RF Logics.

It provides an extremely cost-effective and unparalleled powerful integrated access control and facility management solution with the StarWatch Dual Pro I and StarWatch Dual Pro II S/W).

ICON100 Door Controller shall be installed with controller built-in Finger007 and 505R series of standalone / network products via RS232C/RS422 (CNP200), TCP/IP (Neteye1000 is required), and Dial-up Modem communication. It has 2 reader inputs for anti-passback, 2 form C-relays, 2 TTL outputs, 4 isolated inputs, and 5 LEDs for system status notification as well as self diagnostic display. It supports 26 bit Wiegand or higher reader input formats, ABA Track II, and Mifare Smart Card reader inputs.

Its dynamic memory control will be able to reallocate the standard 10,000 card holder memory and 7,500 event buffer capacities. . ICON100 Nema Pack has an integrated tamper switch, 3 LEDs for system status indication on the front cover, one single door controller board, and a maintenance-free 3 Amp power supply in the heavy-duty steel enclosure.

• Single Door Access Controller Panel
• Dynamic Control of Memory up to 10,000 Users / up to 7,250 Event Buffers
• Standalone / Network Communication via RS232 / RS422 / RS485 (Max.32ch), TCP/IP (LAN Converter required)
• Independent 5 Inputs and 4 Outputs including 2ea of 2 Form-C Relay Outputs
• Reader Port for Anti-passback Function: iCON100 - 2ea (26bit Wiegand, 4 / 8bit Burst for PIN) iCON100M - 2ea (ABA Track II)
• Remain ID & Event Data and Setting Value in case of Electric Outage
• Optional LCD display and Keypad connectable to Control for Standalone Operation, Manual Setting
• Duress Mode Function
• Alarm Event Monitoring using Tamper Switch (by Application Software)
• Communication Status via LED Indicator
• Options: LCD display, Keypad (for standalone, manual setting)
• Compatible Software: STARWATCH DUAL PRO I / II

Contactless Smart Card Intelligent Single Door Access Controller Panel

• Contactless Smart Card Intelligent Single Door Access Controller Panel
• Dynamic Control of Memory up to 10,000 Users / up to 7,250 Event Buffers
• Standalone / Network Communication via RS232 / RS422 / RS485 (Max.32ch), TCP/IP (LAN Converter required)
• Independent 5 Inputs and 4 Outputs including 2ea of 2 Form-C Relay Outputs
• 2ea of Reader Port for Anti-passback Function: 34bit Wiegand, 4 / 8bit Burst for PIN
• Remain ID & Event Data and Setting Value in case of Electric Outage
• Optional LCD display and Keypad connectable to Control for Standalone Operation, Manual Setting
• Duress Mode Function
• Alarm Event Monitoring using Tamper Switch (by Application Software)
• Communication Status via LED Indicator
• Options: LCD display, Keypad (for standalone, manual setting)
• Compatible Software: STARWATCH DUAL PRO I / II
• Compatible Reader: SR10, SR30, SRK101 FINGER006SR, FGR006SR, FACEO06SR

Contactless Smart Card Intelligent Multi Doors [4] Access Control Panel

• Contactless Smart Card Intelligent Multi Doors[4] Access Control Panel (EIO88 required to Control 3 and 4 Doors)
• Dynamic Control of Memory up to 50,000 Users / up to 29,500 Event Buffers : 1,000 ~ 20,000 / 30,000 / 40,000 / 50,000 Users 20,000 ~ 29,500 / 3,000 / 8,000 / 14,000 Event Buffers
• Standalone/Network Communication via RS232 / RS422 / RS485 (Max.255ch), TCP/IP (Internal TCP/IP Module required (optional))
• Expansion I/O Board available (EIO88: 8 Inputs / 8 Relay Outputs)
• Independent 7 Inputs and 7 Outputs including 4ea of 2 Form-C Relay Outputs
• 4ea of Reader Port for Anti-passback Function: 34bit Wiegand and 4 / 8bit Burst for PIN
• 2 Men Operation
• ARM / DISARM Function for Alarm Panel
• 2 Levels Individual Door Opening Time Setting available
• Remain ID & Event Data and Setting Value in case of Electric Outage
• Optional LCD display and Keypad connectable to control for Standalone Operation, Manual Setting
• Duress Mode Funtion
• Alarm Event Monitoring using Tamper Switch (by Application Software)
• Communication Status via LED Indicator
• Options: LCD display, Keypad (for standalone, manual setting) Internal TCP/IP Module Expansion I/O Board
• Compatible Software: STARWATCH iTDC PRO I / II
• Compatible Reader: SR10, SR30, SRK101 FINGER006SR, FGR006SR, FACEO06SR