 
  |
| FACE006/P/EX |
| Facial & Proximity / PIN Reader |
|
|
|
|
 |
- Architect & Engineer Specification : FACE006/P/EX Architect
& Engineer Specification
- Catalog : FACE006/P/EX Catalog
- Catalog : Facial Catalog
- Installation Guide : FACE006 / FACE007 Series Quick Installation
Guide
- Manual : FACE006 Manual
- Software : STAR BIO READER Software
- Software : STAR BIOREADER INTERFACE SDK V2.02.00
- Software : STARWATCH DUAL PRO II
- Software : STARWATCH iTDC PRO I
- Software : STARWATCH iTDC PRO I
- Software : STARWATCH iTDC PRO II
|
|
|
|
Facial & Proximity / PIN Reader
The FACE006 has a built-in proximity reader,
back-lit keypad and LDC display, and camera module with full 3-D
color imaging for high reliability as well as easy operation. This
user-friendly device allows easy registration of a proximity card,
PIN number and facial template for each user. The system can accommodate
10,000 users and it has a 23,000-event transaction buffer. Built-in
10cm range proximity reader and keypad module offers various access
modes in any combination of proximity cards, PIN numbers and facial
templates and the user may change access mode by time schedule.
Verification of the facial image using prox card identification
takes less than 1 second. Network Communications is available via
RS232/RS422/RS485, modem or via TCP/IP with external converter.
It is designed to meet UL requirements and CE and FCC approved.
One year Warranty.
|
| KEY Features |
- 1:1 Verification
- 125KHz
Proximity / PIN and Facial Recognition
- 10,000
Facial Users storable 4 Facial Templates
- Network
Communication via RS232 / RS422 / RS485 (Max.255ch), TCP/IP (External
LAN Converter required)
- 1ea of
External Reader Port (FACE006EX): 26 / 34bit Wiegand, 4 / 8bit
Burst for PIN and ABA Track II
- 26bit
Wiegand and ABA Track II Output Format
- Video
Output with NTSC Signal, Voice Output
- Tamper
Switch
- Rainbow
Color LED Indicator for Image Capture
- Options:
Video Output with PAL Signal (Coming Soon) Supervisory Signal
- Compatible
Software: STARWATCH DUAL PRO I / II, iTDC PRO I / II
- Compatible
Controller: iCON100, iTDC, Third Party Controller, Standalone
Controller
|
| Comparison Table |
| FACE006 |
Built-in 125KHz (4¡±) Proximity
Reader |
RF (PIN) only / RF (PIN)+
Face + P/W (4digit)
RF (PIN)+P/W (4digit)+ Face |
| FACE006P |
PIN (4~8digit) only / PIN
+ Face + P/W (4digit)
PIN + P/W (4digit) + Face |
| FACE006EX |
Built-in External Reader Port |
RF (PIN) only / RF (PIN)+
Face + P/W (4digit)
RF (PIN)+P/W (4digit)+ Face |
|
| Specifications |
|
Model |
FACE006 |
FACE006P |
FACE006EX |
| CPU |
32bit DSP, 8bit and 16bit
Microprocessor |
Memory
Module |
Facial Module (FRM10K) |
Program
Memory |
32KByte EPROM |
Data
Memory |
16MByte Flash Memory |
| Controller |
Program
Memory |
256KByte Flash Memory |
Data
Memory |
512KByte SRAM (Battery
back up) |
| Facial User / Event Buffer |
10,000 Facial Users |
| Facial Templates Size |
730Byte (3DES) |
| Read Range |
Passive Type |
IDK50 / IMC125: Up to 2 inch (5cm)
IDC80 / IDC170: Up to 4 inch (10cm) |
PIN only |
Depending on External Reader |
| Active Type |
IDA150 / IDA200 compatible |
| Reading Time (Card) |
30ms. |
| Verification Time |
Less than 0.5sec. |
| Power / Current |
DC 12V / Max.1A |
| External Reader Port |
N/A |
N/A |
1ea : 26 / 34bit Wiegand, 4 / 8bit
Burst for PIN, ABA Track II |
| Communication |
RS232 / RS422 / RS485 (Max.255ch), TCP/IP
(External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps,
19,200bps, 38,400bps, 57,600bps and 115,200bps (selectable) |
| Input Port |
2ea (Error-Input, OK-Input) |
| Output Port |
2ea (Error-Output, OK-Output
(Open Collector Output)) |
| 1ea (Video Output / Composite
1Vp-p 75 Ohm unbalanced) |
| Output Format |
26bit Wiegand, ABA Track II |
| Video Signal |
NTSC Signal (default),
PAL Signal (optional) |
| CCD Camera |
430K pixels (NTSC Signal) |
| LCD |
Graphic LCD (122 x 36dots)
/ 2.62¡± x 0.55¡± (60.5mm x 18.5mm) Screen |
| Keypad |
16 Key Numeric Keypad |
| LED Indicator / Beeper |
1ea of Rainbow Color LED
Indicator for Image Capture
3 Array LED Indicators (Red, Green and Yellow) / Piezo Buzzer |
| Voice |
Yes |
| Operating Temperature |
Fingerprint Module / LCD |
0¡Æ to +40¡ÆC (-32¡Æ to +104¡ÆF)
/ -20¡Æ to +70¡ÆC (-4¡Æ to +158¡ÆF) |
| Controller / RF Reader |
-15¡Æ to +40¡ÆC (+5¡Æ to
+104¡ÆF) / -35¡Æ to +65¡ÆC (-31¡Æ to +149¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Color / Material |
Dark Pearl Gray / Polycarbonate |
| Dimension (W x H x T) / Weight |
5.1¡± x 7¡± x 1.9¡± (130mm
x 187mm x 54mm) / 600g (1.32lbs) |
|
| Facial Module Specifications |
| Model |
FRM 10K |
|
CPU |
32bit DSP |
| Memory |
Program Memory |
32KByte EPROM |
| Data Memory |
16MByte Flash Memory |
| Facial User |
10,000 Facial Users |
| Capture Image Size |
480 x 640 pixels |
| Verification Time |
Less than 0.5sec. |
| Communication |
RS232 |
| Baud Rate |
9,600bps (default) / 14,400bps,
19,200bps,
38,400bps, 57,600bps and 115,200bps (selectable) |
| Power / Current |
DC 5V / Max.500mA |
| CCD Camera |
430K pixels (NTSC Signal) |
| Operating Temperature |
0¡Æ to +40¡ÆC (-32¡Æ to +104¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Dimension (W x H x T) / Weight |
3.7¡± x 2.1¡± x 0.24 (95mm x 55mm x 6mm) / 30g (0.07lbs) |
|
| Dimensions in Inches (mm) |
|
|
|
|
 |
|
|
|
