- Features
- Specifications
- Downloads
|
Facial & Proximity / PIN Time & Attendance
Access Controller
TheFACE007 is an intelligent Standalone Single
Door Access Controller based on dual microprocessors is designed
for the highest security access control with built-in proximity
reader, keypad, and facial recognition module with full 3-D color
imaging for high reliability as well as easy operation. The system
can accommodate 10,000 users and it has a 23,000 event transaction
buffer. Built-in 10cm proximity reader and facial recognition module
offers various access modes in any combination of proximity cards,
PIN numbers, and facial templates and the user may change access
mode by time schedule. Verification of the facial image using prox
card identification takes less than 1 second. Network Communication
is available via RS232/RS422/RS485, modem, or via TCP/IP with external
converter. It is designed to meet UL requirements and CE and FCC
approved. One year Warranty.
|
KEY Features
|
- 1:1 Verification
- 125KHz Proximity / PIN and Facial
Recognition
- Dual Function for Access Control
and Time & Attendance
- 10,000 Facial Users storable 4
Facial Templates / 20,000 Event Buffers
- Various Operating Mode
- Standalone / Network Communication
via RS232 / RS422 / RS485 (Max.32ch), TCP/IP (External LAN Converter
required)
- 1ea of External Reader Port for
Anti-passback Function: 26bit Wiegand and 4 / 8bit Burst for PIN
- Independent 4 Inputs and 4 Outputs
Including 4ea of 2 Form-C Relay Outputs
- Video Output with NTSC Signal,
Voice Output
- Alarm Event Monitoring using Tamper
Switch (by Applicant Software)
- Rainbow Color LED Indicator for
Image Capture
- Options: Video Output with PAL
Signal (Coming Soon)
- Compatible Software: STARWATCH
DUAL PRO I / II
|
Time Schedule
|
- Time Code : 10
- Time Interval : 5
- Holiday Code : 10
- Holiday : 32
|
Comparison Table
|
| FACE007 |
Built-in 125KHz (4¡±) Proximity
Reader |
RF (PIN) only / RF (PIN) +
Face + P/W (4digit)
RF (PIN) + P/W (4digit) + Face |
| FACE007P |
PIN (4~8digit) only / PIN
+ Face + P/W (4digit)
PIN + P/W (4digit) + Face |
|
Specifications
Model |
FACE007 |
FACE007P |
| CPU |
32bit DSP, 8bit and 16bit
Microprocessor |
Memory
Module |
Facial Module (FRM10K) |
Program
Memory |
32KByte EPROM |
Data
Memory |
16MByte Flash Memory |
| Controller |
Program
Memory |
256KByte Flash Memory |
Data
Memory |
512KByte SRAM (Battery
back up) |
| Facial User / Event Buffer |
10,000 Facial Users /
20,000 Event Buffers |
| Facial Templates Size |
730Byte (3DES) |
| Read Range |
Passive Type |
IDK50 / IMC125: Up to 2 inch (5cm)
IDC80 / IDC170: Up to 4 inch (10cm) |
PIN only |
| Active Type |
IDA150 / IDA200 compatible |
| Reading Time (Card) |
30ms. |
| Verification Time |
Less than 0.5sec. |
| Power / Current |
DC 12V / Max.1A |
| External Reader Port |
1ea (26bit Wiegand and
4 / 8bit Burst for PIN for Anti-passback) |
| Communication |
RS232 / RS422 / RS485 (Max.32ch), TCP/IP
(External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps,
19,200bps, 38,400bps, 57,600bps and 115,200bps (selectable) |
| Input Port |
4ea (Exit Button, Door Sensor, Aux#1,
Aux#2) |
| Output Port |
4ea (2 FORM-C Relay Output
(COM, NO, NC) / DC12V~18V, Rating Max.2A) |
| 1ea (Video Output / Composite
1Vp-p 75 Ohm unbalanced) |
| Video Signal |
NTSC Signal (default), PAL Signal (optional) |
| CCD Camera |
430K pixels (NTSC Signal) |
| LCD |
Graphic LCD (122 x 32dots)
/ 2.62¡± x 0.55¡± (60.5mm x 18.5mm) Screen |
| Keypad |
16 Key Numeric Keypad |
| LED Indicator / Beeper |
1ea of Rainbow Color LED
Indicator for Image Capture
3 Array LED Indicators (Red, Green and Yellow) / Piezo Buzzer |
| Voice |
Yes |
| Operating Temperature |
Fingerprint Module / LCD |
0¡Æ to +40¡ÆC (-32¡Æ to +104¡ÆF) / -20¡Æ to
+70¡ÆC (-4¡Æ to +158¡ÆF) |
| Controller / RF Reader |
-15¡Æ to +40¡ÆC (+5¡Æ to +104¡ÆF) / -35¡Æ to
+65¡ÆC (-31¡Æ to +149¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity
non-condensing |
| Color / Material |
Dark Pearl Gray / Polycarbonate |
| Dimension (W x H x T) / Weight |
5.1¡± x 7¡± x 1.9¡± (130mm
x 187mm x 54mm) / 600g (1.32lbs) |
|
Facial Module Specifications
|
| Model |
FRM 10K |
CPU |
32bit DSP |
| Memory |
Program Memory |
32KByte EPROM |
| Data Memory |
16MByte Flash Memory |
| Facial User |
10,000 Facial Users |
| Capture Image Size |
480 x 640 pixels |
| Verification Time |
Less than 0.5sec. |
| Communication |
RS232 |
| Baud Rate |
9,600bps (default) / 14,400bps,
19,200bps,
38,400bps, 57,600bps and 115,200bps (selectable) |
| Power / Current |
DC 5V / Max.500mA |
| CCD Camera |
430K pixels (NTSC Signal) |
| Operating Temperature |
0¡Æ to +40¡ÆC (-32¡Æ to +104¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Dimension (W x H x T) / Weight |
3.7¡± x 2.1¡± x 0.24 (95mm x 55mm x 6mm) / 30g (0.07lbs) |
|
Dimensions in Inches (mm)
|
|
Description |
PDF |
| Catalog(English) Face007/P |
|
| Manual(English) Face007/P |
|
| Architect & Engineer Specification Face007 |
|
| Architect & Engineer Specification Face007P |
|
|
