|
Model |
FGR007A |
| CPU |
32bit ARM9 and Dual 8bit Microprocessor |
| Memory Module |
Fingerprint Module |
Program Memory |
128KByte ROM |
| Data Memory |
128KByte / 256KByte / 512KByte Flash
Memory |
| Controller |
Program Memory |
64KByte Flash Memory |
| Data Memory |
512KByte Flash Memory |
| Fingerprint User |
1,000 / 2,000 / 4,000 Fingerprint
Users |
| Fingerprint Templates Size |
800Bytes for 2 Fingerprint Templates |
| Event Buffer |
2,000 Event Buffers |
| Read Range |
Passive Type |
IDK50 / IMC125 : Up to 2 inch (5cm)
IDC80 / IDC170 : Up to 4 inch (10cm) |
| Active Type |
IDA150 / IDA200 compatible |
| Reading Time (Card) |
30ms. |
| Verification Time |
Less than 1sec. |
| Identification Time |
Less than 2sec. |
| Power / Current |
DC 12V / Max.300mA |
| External Reader Port |
1ea (26bit Wiegand, 4 / 8bit Burst
for PIN for Anti-passback) |
| Communication |
RS232 / RS422 / RS485 (Max.32ch) |
| TCP/IP (External LAN Converter required) |
| Wireless (e.g. Bluetooth Module
required) |
| Baud Rate |
9,600bps (default) / 4,800bps, 19,200bps
and 38,400bps (selectable) |
| Input Port |
2ea (Exit Button, door Sensor) |
| Output Port |
2ea (2 FORM-C Relay Output (COM,
NO, NC) / DC12V~18V, Rating Max.2A) |
| LED Indicator |
3 Array LED Indicators (Red and Green) |
| Beeper |
Piezo Buzzer |
| Operating Temperature |
Fingerprint Module |
- 15¡Æ to +40¡ÆC (+5¡Æ to +104¡ÆF) |
| Controller |
- 15¡Æ to +70¡ÆC (+5¡Æ to +158¡ÆF) |
| RF Reader |
- 35¡Æ to +65¡ÆC (-31¡Æ to +149¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Color / Material |
Pearl Purple / Polycarbonate |
| Dimension (W x H x T) / Weight |
2.6" x 5.1" x 2.0" (66mm x 129mm
x 52mm) / 259.5g (0.57lbs) |
