- Features
- Specifications
- Downloads
|
Slave Finger Biometric Reader with Proximity
/ Keypad and LCD
The FINGER006 is Finger Biometric Slave Reader
for the 3rd party's controller integr-ation as a reader. It has
a built-in proximity reader, back-lit keypad and LCD display, and
finger print module with solid optical sensor for high reliability
and easy operation.
Verification and Data Transfer to Control Panel: This user-friendly
device allows easy registration of a proximity card, PIN number,
and two fingerprints for each user. Once the Enrolled Fingerprints
are verified, user's proximity card with Wiegand 26 or higher data
format and/or pin number data, will be transferred to the connected
control panel.
Finger Template Enrollment with the 3rd party's control panel will
be done from the registration unit and/or local units. The enrolled
finger templates can be distributed to the local installed finger
units' batch or individually via StarWatch Fingerprint Reader Pro
S/W. (See details of StarWatch Fingerprint Reader Pro
|
KEY Features
|
- 1:1 Verification and 1: N Identification
- Identification Method: by PIN Key
(default) by Auto Touch Sensor (optional): FINGER006A / PA / EXA
- 125KHz Proximity / PIN and Fingerprint
Recognition
- 1,000 / 2,000 / 4,000 Fingerprint
Users
- ID only Function for Fingerprint
Unregistrerable Person
- Network Communication via RS232
/ RS422 / RS485 (Max.255ch), TCP/IP (External LAN Converter required)
- 1ea of External Reader Port (FINGER006EX):
26 / 34bit Wiegand, 4 / 8bit Burst for PIN and ABA Track II
- 26bit Wiegand and ABA Track II
Output Format
- Current Time Display on the LCD
- High Protection from Scratch and
ESD (Electro Static Discharge)
- High Quality Optical Sensor
- Dual Tamper Switches
- Options: 1,000 / 2,000 / 4,000
Fingerprint Users, Supervisory Signal Auto Touch Sensor for Identification
(FINGER006A / PA / EXA)
- Compatible Software: STARWATCH
DUAL PRO I / II, iTDC PRO I / II
- Compatible Controller: iCON100,
iTDC, Third Party Controller, Standalone Controller
|
Comparison Table
|
| FINGER006 |
Built-in 125KHz (4¡±) Proximity
Reader |
RF (PIN) only / Fingerprint
only / RF (PIN)+ Fingerprint
RF (PIN)+P/W (4digit) / RF (PIN)+P/W (4digit)+ Fingerprint |
| FINGER006P |
PIN (4~8digit) only / Fingerprint
only / PIN + Fingerprint
PIN + P/W (4digit) / PIN+ P/W (4digit)+ Fingerprint |
| FINGER006EX |
Built-in 1ea of External Reader
Port |
RF (PIN) only / Fingerprint
only / RF(PIN)+ Fingerprint
RF (PIN)+P/W (4digit) / RF (PIN)+P/W (4digit)+ Fingerprint |
| FINGER006A |
FINGER006 including Auto Touch
Sensor for Identification |
| FINGER006PA |
FINGER006P including Auto
Touch Sensor for Identification |
| FINGER006EXA |
FINGER006EX including Auto
Touch Sensor for Identification |
|
Specifications
Model |
FINGER006 |
FINGER006P |
FINGER006EX |
| CPU |
32bit ARM9 and Dual 8bit Microprocessor |
Memory
Module |
Fingerprint
module |
Program
Memory |
128KByte Flash Memory |
Data
Memory |
128KByte / 256KByte / 512KByte Flash
Memory |
| Controller |
Program
Memory |
64KByte Flash Memory |
Data
Memory |
512KByte SRAM (Battery back up) |
| Fingerprint User |
1,000 / 2,000 / 4,000 Fingerprint
User |
| Fingerprint Templates Size |
800Bytes for 2 Fingerprint Templates |
| Read Range |
Passive Type |
IDK50 / IMC125: Up to 2 inch (5cm)
IDC80 / IDC170: Up to 4 inch (10cm) |
PIN only |
Depending on External Reader |
| Active Type |
IDA150 / IDA200 compatible |
| Reading Time (Card) |
30ms. |
| Verification Time |
Less than 1sec. |
| Identification Time |
Less than 2sec. |
| Power / Current |
DC 12V / Max.300mA |
| External Reader Port |
N/A |
N/A |
1ea: 26 / 34bit Wiegand,
4 / 8bit Burst for PIN,
ABA Track II |
| Communication |
RS232 / RS422 / RS485 (Max.255ch),
TCP/IP (External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps, 19,200bps
and 38,400bps (selectable) |
| Input Port |
2ea (Error-Input, OK-Input) |
| Output Port |
2ea (Error-Output , OK-Output (Open
Collector Output)) |
| Output Format |
26bit Wiegand, ABA Track II |
| LCD |
Character LCD (2 Lines x 16 Char) /
2.62¡± x 0.55¡± (65.6mm x 13.8mm ) Screen |
| Keypad |
16 Key Numeric Keypad with Back
Lighting |
| LED Indicator / Beeper |
3 Array LED Indicators (Red, Green
and Yellow) / Piezo Buzzer |
| Operating Temperature |
Fingerprint Module / LCD |
-15 to +40¡ÆC (+5 to +104¡ÆF) / 0
to +50¡ÆC (+32 to +122¡ÆF) |
| Controller / RF Reader |
-15 to +70¡ÆC (+5 to +158¡ÆF) / -35
to +65¡ÆC (-31 to +149¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Color / Material |
Dark Pearl Gray / Polycarbonate |
| Dimension (W x H x T) / Weight |
6.36¡± x 5.28¡± x 1.9¡± (161.5mm x
134mm x 48.5mm) / 547g (1.21lbs) |
| Certification |
MIC, CE, RoHS |
|
Finger Module Specifications
|
| Resolution |
500dpi
|
Capture Image Size
|
356 x 292 pixels
|
Extraction Image Size
|
248 x 292 pixels
|
Sensing Area
|
12.7 x 14.9 mm
|
Scanner
|
High Quality Optical
Sensor
|
FAR (False
Acceptance Ratio)
|
0.001%
|
FRR (False
Reject Ratio)
|
0.1%
|
ESD (Electro
Static Discharge)
|
15KV
|
Verification Time
|
Less than 1sec.
|
| Identification Time |
Less than 2sec.
|
|
Dimensions
|
|
Description |
PDF |
| Catalog(English) Finger006 |
|
| Catalog(English) Finger006P, Finger006EX |
|
| Manual(English) Finger006, Finger006P, Finger006EX |
|
| Architect & Engineer Specification Finger006 |
|
| Architect & Engineer Specification Finger006EX |
|
| Architect & Engineer Specification Finger006P |
|
| Finger006 CE, MIC Certificate |
|
|
.jpg)
