|
Model |
FGR006SRB |
FINGER006SRB |
| CPU |
32bit ARM9 and 8bit Microprocessor |
32bit ARM9 and Dual 8bit Microprocessor |
| Memory |
Fingerprint Module |
Program Memory |
1MByte Flash ROM |
| Data Memory |
8MByte SDRAM |
| Controller |
Program Memory |
128KByte ROM |
256KByte ROM |
| Data Memory |
256KByte SRAM |
32KByte SRAM |
| User |
Unlimited Fingerprint Users |
| Fingerprint Template Size |
400Bytes for 1 Fingerprint Template
on the Smart Card |
| Frequency |
13.56MHz [MIFARE] |
| Read Range |
ISK50 / IHC80 / IMC135: Up to 2 inch
(5cm)
ISC80: Up to 4 inch (10cm) |
| Reading Time (Card) |
500ms. |
| Verification Time |
Less than 1sec. |
| Power / Current |
DC 12V / Max.350mA |
DC 12V / Max.300mA |
| Communication |
RS232 (Max.255ch) |
| TCP / IP (External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps, 19,200bps
and 38,400bps (selectable) |
| Input Port |
2ea
:External LED Control,
External Buzzer Control |
2ea
:Error-Input,OK-Input |
| Output Port |
2ea (Error-Output, OK-Output (Open Collector
Output)) |
| Output Format |
26bit Wiegand, RS232 (default) / ABA
Track II (optional) |
| LCD |
N/A |
Character LCD (2 Lines x 16 Char)
2.62¡± x 0.55¡± (65.6mm x 13.8mm) Screen |
| Keypad |
N/A |
16 Key Numeric Keypad with Back Lighting |
| LED Indicator |
3 Array LED Indicators
(Red and Green) |
3 Array LED Indicators
(Red, Green and Yellow) |
| Beeper |
Piezo Buzzer |
Operating
Temperature |
Fingerprint Module / LCD |
-15¡Æ to +40¡ÆC (+5¡Æ to +104¡ÆF) / 0¡Æ to
+50¡ÆC (+32¡Æ to +122¡ÆF) |
| Controller / RF Reader |
-15¡Æ to +70¡ÆC (+5¡Æ to +158¡ÆF) / -35¡Æ
to + 65¡ÆC (-31¡Æ to +149¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Color |
Pearl Dark Gray and Light
Gray |
Dark Pearl Gray |
| Material |
Polycarbonate |
| Dimension (W x H x T) |
2.6¡± x 5.1¡± x 2.0¡±
(66mm x 129mm x 52mm) |
6.36¡± x 5.28¡± x 1.9¡±
(161.5mm x 134mm x 48.5mm) |
| Weight |
259.5g (0.57lbs) |
547g (1.21lbs) |
| Certification |
FCC, CE, MIC, RoHS |
MIC, RoHS |
.jpg)
