|
Model |
IP-FINGER007 |
| CPU |
32bit ARM9 and Dual 8bit Microprocessor |
| Memory |
Fingerprint
Module |
Program Memory |
128KByte ROM |
| Data Memory |
128KByte / 256KByte / 512KByte Flash
Memory |
| Controller |
Program Memory |
64KByte Flash Memory |
| Data Memory |
512KByte SRAM (Battery back up) |
| Fingerprint User / Event Buffer |
1,000 / 2,000 / 4,000 Fingerprint Users
/ 26,000 Event Buffers |
| Fingerprint Templates Size |
800 Bytes for 2 Fingerprint Templates |
| Read Range |
IPK50: Up to 2 inch (5cm)
IPC80 / IPC170: Up to 4 inch (10cm) |
| Reading Time (Card) |
30ms. |
| Verification Time |
Less than 1sec. |
| Identification Time |
Less than 2sec. |
| Power / Current |
DC 12V / Max.300mA |
| External Reader Port |
1ea (26bit Wiegand, 4 / 8bit Burst for
PIN for Anti-passback) |
| Communication |
RS232 / RS422 / RS485 (Max.32ch), TCP/IP
(External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps, 19,200bps
and 38,400bps (selectable) |
| Input Port |
4ea (Exit Button, Door Sensor, Aux#1,
Aux#2) |
| Output Port |
2ea (2 FORM-C Relay Output (COM, NO,
NC) / DC12V~18V, Rating Max.2A) |
| 2ea (TTL Output / DC5V, Rating Max.20mA) |
| LCD |
Character LCD (2 Lines x 16 Char) /
2.62¡± x 0.55¡± (65.6mm x 13.8mm) Screen |
| Keypad |
16 Key Numeric Keypad with Back Lighting |
| LED Indicator / Beeper |
3 Array LED Indicators (Red, Green and
Yellow) / Piezo Buzzer |
Operating
Temperature |
Fingerprint Module / LCD |
-15¡Æ to +40¡ÆC (+5¡Æ to +104¡ÆF) / 0¡Æ to
+50¡ÆC (+32¡Æ to +122¡ÆF) |
| Controller / RF Reader |
-15¡Æ to +70¡ÆC (+5¡Æ to +158¡ÆF) / -35¡Æ
to +65¡ÆC (-31¡Æ to +149¡ÆF) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Color / Material |
Dark Pearl Gray / Polycarbonate |
| Dimension (W x H x T) / Weight |
6.36¡± x 5.28¡± x 1.9¡± (161.5mm x 134mm x 48.5mm)
/ 547g (1.21lbs) |
| Certification |
UL, FCC, CE, MIC, RoHS |
.jpg)
